Victony Wifi Extender Setup When it comes to a cost-effective investment, nothing beats Victony wireless range extenders. All of your online activities are streamlined, accelerated, and secured by Victony. Victony does this by operating at a 1200 MBPS speed.
As a result, whether it’s gaming, video streaming, or downloading, everything is quick and easy. Victony extender has a plethora of features and is an excellent tool for resolving all of your internet-related issues.
In this article, you will learn about two ways to set up a Victony Wifi extender:
- WPS Process
- Manual process
Victony WiFi Extender Setup Using WPS
Follow the given steps for Victony Wifi Extender Setup using WPS:
- First, connect your extender to your router using a nearby power supply.
- When connected, check to see if the power LED shows a solid color image.
- Place the WPS button on the router as well as the Victony Wi-Fi Extender right now. If found, press the buttons on each device simultaneously for two to three seconds.
- When you notice a green blinking light on your extender, you have successfully connected the extender to your router.
- You can begin setting up on 192.168.10.1 after waiting for the systems to recognise each other for 10 to 15 seconds.
- The extender’s lead turns a bright green color after making contact.
- The extender may now be removed from the location and placed elsewhere in your house. For best results, it is advised to install the extender in locations where the internet does not function at all.
- Let’s now explore the alternative course of action.
- Click here to view a list of ap.setup issues.
In case you are still facing an issue and need any guidance regarding your Victony Wifi Extender Setup contact us on our Toll-free number.
Victony Repeater Setup via Manual Process
- Connect your computer or device to the extender’s Wi-Fi network (the network name should be something like “Victony_EXT_xx”).
- Open a web browser and type the IP address of the extender into the address bar. The default IP address is usually printed on a sticker on the bottom of the extender.
- Log in to the extender’s web-based setup page using the default username and password (usually both “admin”).
- Follow the on-screen instructions to configure the extender, including setting up the Wi-Fi network name (SSID) and password, as well as any other desired settings.
- Save the changes and restart the extender.
- Your devices should be connected to the expanded Wi-Fi network.
- Verify that the devices have good connectivity to the extended network.
Note: The exact steps may vary slightly depending on the model of the Victony extender you are using.For detailed instructions, visit the manufacturer’s website or the manual.
Renew your effort
In case you are still facing an issue and need any guidance regarding your Victony Wifi Extender Setup contact us on our Toll-free number.
How to Reset Victony Wifi Extender ?
To reset the Victony Wifi Extender, follow these steps:
- Locate the reset button: The reset button is usually located at the bottom or back of the Wifi Extender.
- Power on the device: Make sure the Wifi Extender is powered on before resetting it.
- Press the reset button: Use a paper clip or a similar tool to press and hold the reset button for 10-15 seconds.
- Release the button: After holding the button for the required time, release it and wait for the device to restart.
- Check the Wifi Extender’s status: Check the status of the Wifi Extender to ensure it has been reset successfully.
- Set up the Wifi Extender again: After resetting the Wifi Extender, you will need to set it up again to connect it to your router.
What are the possible troubleshooting steps during Victony Wifi Extender Setup
- Checking the Power Supply: Make sure that the power source is properly connected and provides enough power to the device.
- Checking the Router Connection: Ensure that the router is working properly and has an active internet connection.
- Checking the LED Light: Make sure that the LED light on the Wifi Extender is flashing, which indicates it is in pairing mode.
- Password Verification: Verify that you have entered the correct password for the router, if the LED light is still not flashing.
- Location of Extender: The Wifi Extender should be placed within range of the router and away from any possible obstructions that could block the signal.
- Restarting the Extender: If the LED light is still not flashing, try restarting the Wifi Extender and the router.
- Updating the Firmware: Check for any available firmware updates for the Wifi Extender and install them to ensure it is up-to-date.
- Contacting Support: If you are still having trouble with the setup, reach out to the manufacturer’s support team for further assistance
In case you are still facing an issue and need any guidance regarding your Victony Wifi Extender Setup contact us on our Toll-free number.
