Military patches, also known as insignia or badges, are an ancient tradition in the armed forces’ uniforms. It helps identify personnel’s branch, rank, division, skill set, and adequate knowledge of a particular field. It is worn by armed services worldwide to represent their fighting spirit, pride, and patriotic sentiment. Besides the standard insignia mostly worn on the sleeve or front chest area, soldiers and army officers are also awarded many other badges for cherishing their achievements.
Two Methods For How To Sew On Military Patches
Whether you want to wear a military patch or your dear ones, it is vital to sew it on the uniform; we are here to help. This blog will deeply delve into two methods to sew on service insignia, and you can opt for the way that suits you the most.
Let’s not squander away additional time and get right in!
Method 1: Hand Sewing The Patch
- Prep Up Your Uniform
Always start the process by prepping up the garment you want to sew your military patches custom made on. Washing, drying and ironing will prevent the fabric from bunching behind the emblem after the first and second wash. Cotton shrinks up after the first wash. So if you want to see your logo on a cotton fabric, wash and iron to prevent wrinkles and bunching and let your piece look perfect on the cloth.
- Get Your Hands On A Needle And Thread
Once your garment is washed and ironed correctly, get your hands on a needle and thread. The colour of the strand should be either the same hue as your clothe or the badge’s border. And if you can’t get the same shade, opt for a darker tone in the same colour because the darker tones blend well compared to the light ones. You can also use the transparent strand for a clean and professional look.
- Correctly Place The Badge
You can’t just sew on your military badges anywhere. There are proper positions for the placement, which depend on various factors. Hence, you should be clear about where you want to see your piece. Plus, you can get in touch with your seniors to ensure you’re not committing any mistakes regarding placement.
- Place The Badge Onto the Uniform To Check
Sewing directly without ensuring how it would appear after wearing can cause any blunder, and we are sure you don’t want it. Therefore, first, secure your emblem to the garment using the pins. After that, adorn the uniform to check whether it fits and how it looks on you. You can also get suggestions from someone else in this case. Plus, ensure you use the pins in a way that doesn’t harm you while wearing them.
- Secure Your Military Patches For Sewing
Once you’re sure about your military patches UK position, it is time to secure them on the uniform. It is up to you to use safety pins, straight pins, or even adhesive tape. Opt for sticky tape if you don’t want to get hurt by pins while stitching. You have to cut the tape, place it between the badge and garment, and then iron it for enhanced results.
- Cut The Piece Of Thread
If you are new to all this, start cutting 18 inches (45cm) of thread. It is convenient to work with the smaller size of yarn because it avoids tangling. Plus, no need to stress out about the needle running out of strands. You can always re-thread your slender tool. Moreover, you can also not cut the thread from the spool and work with it.
- Thread The Needle And Tie Knot
Inserting the thread in the needle can be a bit tricky. So, if you have a needle threading tool, use it to increase efficiency. However, without the device, you can twist the thread and damp it to gather all the strands into a single one. It will help you to insert the thread in the eye of the needle quickly.
- Start Sewing
Start sewing from the inner side of the fabric and poke it out. Come right through the patch and then insert the needle inwards. Starting from the inside will let the knot stay in place and wouldn’t show the messy part. Therefore, always begin from inside and then poke the needle out.
- Follow the Straight Stitch Pattern
Follow the straight stitch pattern because it is super easy and speedy. Plus, it is less visible, giving the badge the most professional appearance. It would be best to run the needle back from where you brought it out at an appropriate distance of 6mm. Continue stitching it till you reach the point where you started.
- Knot The Thread And Cut The Ends
Knot your thread by threading your needle through to create a loop. Pull your slender tool out of the circle to make a knot, and pull the strands tight to create a loop. Lastly, cut any hanging edges of the thread, tuck it under the badge you bought from any custom patches UK store, and you’re done.
Method 2: Sew The Military Patch Using The Machine
- Iron Your Military Uniform
Iron your uniform to smoothen the cloth for the stitching process. Removing wrinkles before starting to leave no space for the permanent crease.
- Place, Arrange, And Iron The Patch
So far, you must continue the same process as in the first method. Decide the exact position where you want to place the emblem. If it isn’t the iron-on patch, you would require pins or adhesive tape to secure it at a fixed spot. If using adhesive tape, stick it between the cloth and badge and then press it with a household iron.
- Set Up Your Machine And Start Sewing
Set up your machine for the straight stitch. Thread your machinery by following the instructions provided In the manual. If there are any speed settings, set them at low for better results. Gently press your foot on the pedal to let the stitching begin, and then slowly move forward the uniform until you’ve made it all around the way. Finally, seal the stitch and cut the excess threads.
Closure
If you have stuck around here, you probably know how to sew the military badges on the uniform for the first time. You are ready to start, and with practice, you will gain perfection in sewing the emblems onto anything. Hopefully, you found this guide valuable. Before leaving this page, share your thoughts in the comments below.